WKA INTERNATIONAL CLASS,
AKRA, & BOX STOCK PROJECT ENGINES
Most
configurations in stock and ready to ship
WKA, BSP, AKRA
Box Stock Project Kit Motor
Designed for the "Do it Yourself" Person, this
kit contains everything you need to go WKA, AKRA, or BSP ( Box Stock
Racing). Kit includes:
6.5HP Engine
(see note on assembly)
Header and
muffler kit
Throttle kit and
Fuel Pump Mounting Plate
Billet Aluminum
air filter adaptor
Choke hold
Mikuni fuel
pump
Pulse inlet
fitting
Angled air filter
5' fuel hose
Throttle Cable
Note: Blue Lifan engines are available with 14cc or 22cc heads. However 14cc
motors will not meet AKRA/BSP rules.
Note: BSP (Ducar) Motors are shipped
unassembled, all other engines are assembled.
STAGE
1 DIY KIT, ORDER FORM
Select Options
below and click button to add to shopping cart
Select Engine Type
Yellow Clone (Dupor) $219
Blue Clone (Lifan 14cc) $219
Black Clone (Lifan 22cc) $219
Yellow BSP (Ducar) $235
Honda GX200 $379
Select Sanctioning Body/Rules
AKRA
Box Stock Project
WKA
Other
Stage 1 Options
Add CL1/BSP1 Camshaft $20
Add .615 Blueprint
Carb Carb $35
Exhaust Options
.75
"Wiener" Pipe w/Mini 91
.75
"Wiener"
Pipe w/Briggs Muffler -$10
1.0 "
RLV Pipe, no muffler -$10
1.0 " RLV Pipe,
with muffler & clamp $15
($10 added Shipping
to all kits/engines)
Total Cost
Box Stock Motor
Package,
Stage 1
Race Prepped & Ready to Go
Same as the kit, but
all assembly done for you.
This engine is ready to bolt on
your kart and race in WKA or
AKRA's "Box Stock Project" (BSP) class. Everything has been done to prep
the engine according to the rules. The governor has been removed, air
cleaner adapter, fuel pump pulse fitting and throttle mechanism installed.
Includes:
Race Prepped Engine
Air Filter & adapter
with Choke Hold
Header and
RLV
muffler kit
Top plate/throttle
mechanism
Mikuni fuel pump
All necessary hoses.
Throttle Cable
Optional .615 Carb
Optional BSP1/CL1 Cam
Optional Cryo 10.8
Springs
Optional Dyno Tuning
Note: Blue Lifan engines are
available with 14cc or 22cc heads. However 14cc motors will not meet AKRA/BSP
rules.
may vary from picture
STAGE
1 READY TO GO
ENGINE KIT ORDER FORM
Select Options
below and click button to add to shopping cart
Box
Stock Motor, Stage 3
Motor that is completely disassembled,
inspected, parts replaced if needed, and reassembled with special attention
to insure maximum performance. Special attention is paid to the crankshaft,
head, piston rings, and cam specs.
Head/Chamber CCs are set, Carb is flowed and all external settings adjusted
to produce best power. Motor is run on dyno for a minimum of 2 hours. All
major specifications checked to WKA or AKRA. Most HP & Torque possible using
WKA/AKRA specs. All stage 3 engines are fully dyno tuned.
IIncludes:
Stage 3 “Blueprinted”
and Dyno’d BSP Engine
615 Carb
Air Filter & adapter
with Choke Hold
BSP 1 - CL1 Dyno Cam
Honda head Gasket
Honda Jet
Special Race Bearings
Special Header and muffler kit
top plate/throttle
mechanism
Mikuni fuel pump
All necessary hoses.
Set Timing to 18 BTDC
Throttle Cable
Note: header and air filter are shipped loose
STAGE
3 RACE TO READY ENGINE KIT ORDER FORM
Select Options
below and click button to add to shopping cart
Select Engine Type
Yellow Clone (Dupor) $579
Black Clone (Lifan) $579
Yellow BSP (Ducar) $589
Honda GX200 $729
Select Sanctioning Body/Rules
AKRA
Box Stock Project
WKA
Other
Exhaust Options
.75
"Wiener" Pipe w/Mini 91
.75
"Wiener"
Pipe w/Briggs Muffler -$10
1.0 "
RLV Pipe, no muffler -$10
1.0 " RLV Pipe,
with muffler & clamp $15
ENGINE ONLY
- Motor only, race prepped but without header,
linkage, fuel pump & plate, air filter (adapter is included), etc
-
Subtract $90
"Builders Prepared Class", Stage 1, Race Prepped & Ready to Go
This is a built engine ready
to go in accordance with "Builder Prepared" rules. Combustion chamber CC’d,
Carb bored and prepped, Shortblock completely race prepped including Billet
Rod and Dyno Cam, fuel pump pulse fitting and throttle mechanism installed.
Engine is Dyno tested & Tuned
Includes:
Stage 1 6.5 Builder
Prepared Engine
ARC Billet
Connecting Rod with bearing inserts
ARC SFI Certified
Billet Flywheel
Dyno BP Cam
CC
head
Bored Carb
w/140 E-tube
NR Racing Air Filter
Adapter & Choke Hold
Angled Air Filter
Fuel pump pulse fitting
Optional Linkage,
Exhaust, and Fuel Pump
STAGE
1 DIY KIT, ORDER FORM
Select Options
below and click button to add to shopping cart
Select Engine Type
Yellow Clone (Dupor) $559
Black Clone (Lifan) $559
Honda GX200 $719
Stage 1 Options
Add
Linkage/Throttle Plate $20
Add Fuel Pump
$30
Exhaust Options
None
1.0 "
RLV Pipe, no muffler $15
1.0 " RLV Pipe,
with muffler & clamp $45
Total Cost
Builder Prepared Stage 3 “Blueprinted”, Race
Prepped & Ready to Go
This is the motor that
separates 1st Place from the rest of the pack. This Motor is completely disassembled,
inspected, parts replaced where needed, and reassembled with special
attention to insure maximum performance. Head is
specially selected & prepped using a Superflow flow bench & milled to AKRA specs,
A special BP Cam grind is used. Carb is bored to AKRA
maximum and circuitry & interior reworked to provide the best performance. Short block is assembled with special attention paid to
clearances and bearings. Motor is run on dyno for a minimum of 2 hours..
Most HP & Torque possible using AKRA specs.
Same as Stage 1 but adds
Stage 3 “Blueprinted”
6.5 BSP Engine
Genuine Honda piston
Genuine Honda Valves
HD Keepers and
Retainers
Free Spinning Bearings
(NTN Japan)
Stage 4 BP Carb
Special BP Cam
RTT Exhaust System
STAGE
3 DIY KIT, ORDER FORM
Select Options
below and click button to add to shopping cart
Select Engine Type
Yellow Clone (Dupor) $899
Black Clone (Lifan) $899
Honda GX200 $1059
Stage 1 Options
Add
Linkage/Throttle Plate $20
Add Fuel Pump
$30
Exhaust Options
None
1.0 "
RTT BP Pipe, no muffler $50
1.0 " RLV Pipe,
with muffler & clamp $85
Total Cost
Lead time on motors ranges from 1 to
3 days for a Stage 1 BSP to around 4 weeks for Stage 3 BSP , BP, Super
Box motors (all motors are built to order). However, le ad time is based on
the season. Expect longer lead times before and
during race season
