|
|
|
CHINESE 6.5
ENGINES
MOTORS SOLD FOR ORGANIZED
COMPETITION PURPOSES OR EXPORT ONLY
(NOT FOR USE ON ANY
EQUIPMENT, OFF ROAD, RECREATIONAL, OR EMISSIONS CONTROLLED
APPLICATIONS. DOING SO IS A
VIOLATION OF FEDERAL LAW) |
|
Stock Engines
Package
1 Engines
Package
2 Engines
Package
3 Engines
Package
4 Engines |
|
WARNING: STOCK FLYWHEELS ARE UNSAFE!!!!
ANY MOTOR WITH GOVERNOR REMOVED SHOULD USE AN ALUMINUM FLYWHEEL. |
|
ENGINES - NEW IN BOX
($10 additional shipping added to all clones) |
|
6.5 CLONE ENGINES FOR EQUIPMENT APPLICATIONS 6.5 HP,
3600 RPM, Four stroke; Recoil start, Electronic ignition, 3.6 liter fuel
tank, Engine displacement: 196 cc, 3/4'' straight keyed shaft, Keyway:
3/16''. EPA Legal Note: May have 5 bolt valve cover and L shaped tank.
May be different than pictures
|
 |
BLACK LIFAN, Complete with Tank, Muffler, and Air Box |
$129.00 (+$10 additional shipping for all
clones) |
|
|
212 cc Predator
Gas-saving overhead valves for cooler, cleaner performance and longer
life. Horizontal shaft makes this an ideal all-purpose replacement engine.
- 8.8 ft. lbs. @ 2500 RPM
- Precision machined aluminum alloy crankcase with heavy duty cast
iron cylinder
- Ball bearing support shaft for long life
- Fuel shut off for safe transport
- Recoil start
- EPA certified
|
 |
Click Here |
|
CLONE ENGINES FOR
RACING APPLICATIONS
6.5 OHV specially for racing applications. Shipped w/o gas tank, air filter
assembly, or muffler. Engines DO NOT have govoner or low oil cut-off.
Gas tanks are available if needed). For Racing Only.
These are available in choice of three differnet manufacturers/color. High
performance camshafts are optional.
(NOTE: BSP (Ducars) are shipped
unassembled, all others are assembled)
-
YELLOW (DUPOR)
-
YELLOW (DUCAR)
- Box Stock Project
-
BLUE (LIFAN)
- Includes high compression Head
-
BLUE (HF)
- Harbor Freight
|


|
YELLOW CLONE ORDER FORM
Select Options
below and click
button to add to shopping cart
|
|
RACE ENGINES
(For WKA, AKRA & Box Stock Project Motors Click Here) |
|
PACKAGE 1
IN STOCK AND READY TO SHIP
|
|
6.5 Race Prepped Engine approx 9 to 10 hp, 5500 RPM Max |
|
|
|
|
OHV 6.5 Race prepped including, Open
Element Air Filter adapter (no filter), removal of governor, 18 lb Valve Springs,
Small fan, Advanced Timing, and Rejetted carb. 8.5+ HP. Just add Oil, your
exhaust and linkage and go racing.
Aluminum or Honda flywheel recommended. Stock flywheels are prone to
failure.
A vailable as a "Ready to go" Motor - Same as above but includes
Cone style Air
Filter, Linkage, Header/exhaust pipe, throttle cable, and fuel pump mounting plate (Note: If ordered with
Gas Tank, fuel pump mounting plate is not included)
Available
Options
-
Honda Jet Option.
The
standard package(s) use a drilled jet to keep cost down, However using
genuine Honda jets as shown up to 0.2 hp improvement over a jet.
-
CL1 Dyno Cam - Installed
-
Set up for Methanol
-
ARC Billet Rod, Installed
-
Dyno test engine
-
Aluminum Flywheel
-
OEM Honda Flywheel Installed (When available)
-
Fuel Pump package,
includes pulse fitting, Mikuni fuel
pump, and hoses, installed.
-
Small tank for Yellow
Engines -
Tank is smaller and uses shorter gas cam to
reduce overall height approx 1 1/4"- Esp for Doodlebugs). Genuine
Honda Tank
-
212 cc Engine for more power
Click Here
|
 |
PACKAGE 1 ORDER FORM
Select Options
below and click button to add to shopping cart
|
|
PACKAGE 2 Free
Shipping
IN STOCK AND READY TO SHIP
|
|
6.5 Race Prepped Engine approx 10 to 11 hp, 5500 RPM
Max |
|
|
|
|
Same as Package 1, but adds a bored carb, 1.2 Rocker Arms, and a
race prepped & milled head. Approx 9.3 to 1 compression.
Aluminum or Honda flywheel recommended. Stock
flywheels are prone to failure
A vailable as a "Ready to go" Motor - Same as above but includes
Cone style Air
Filter, Linkage, Header/exhaust pipe, throttle cable, and fuel pump mounting plate (Note: If ordered with
Gas Tank, fuel pump mounting plate is not included)
Available
Options
-
Honda Jet Option. The standard package(s)
use a drilled jet to keep cost down, However using genuine Honda jets as
shown up to 0.2 hp improvement over a jet.
-
Genuine Honda Carb (Kehein) Option. Adds
a genuine Honda carb for smoother running, more power, and easier
starting.
-
CL1 Dyno Cam - Installed
-
Set up for Methanol
-
ARC Billet Rod, Installed
-
Dyno test engine
(must order Honda or Aluminum flywheel)
-
Aluminum Flywheel
-
OEM Honda Flywheel Installed (When available)
-
Fuel Pump package, includes pulse fitting, Mikuni fuel
pump, and hoses, installed.
-
Small tank for Yellow
Engines -
Tank is smaller and uses shorter gas cam to
reduce overall height approx 1 1/4"- Esp for Doodlebugs). Genuine Honda
Tank
Note: Billet rod required for SA Extreme or 252 Cam package. |
 |
PACKAGE 2 ORDER FORM
Select Options
below and click button to add to shopping cart
|
|
PACKAGE 3
|
|
6.5 Race Prepped Engine 11 to 12 hp, 6500 RPM Max |
|
Same as
package 2 but with more power and higher Rev capability. Adds full ported
head, bored carb, 18 lb Rev kit, Billet Rod, 1.2 Rockers, Honda Cast Iron
Flywheel, HD Bolt
kit, MOD 2 cam. Has Fuel Pump Pulse Fitting installed.
Approx 10.7 to one compression.
Aluminum flywheel recommended.
Motor is fully
tested and dyno'd
A vailable as a "Ready to go" Motor - Same as above but includes
Cone style Air
Filter, Linkage, Header/exhaust pipe, throttle cable, and fuel pump mounting plate (Note: If ordered with
Gas Tank, fuel pump mounting plate is not included)
Available
Options
-
Honda Jet Option. The standard package(s)
use a drilled jet to keep cost down, However using genuine Honda jets as
shown up to 0.2 hp improvement over a jet.
-
Genuine Honda Carb (Kehein) Option. Adds
a genuine Honda carb for smoother running, more power, and easier
starting.
-
Set up for Methanol
-
Aluminum Flywheel
-
Fuel Pump package, includes pulse fitting, Mikuni fuel
pump, and hoses, installed.
-
Small tank for Yellow
Engines -
Genuine Honda Tank that is smaller and uses shorter gas cam to
reduce overall height approx 1 1/4"- Esp for Doodlebugs)
Camshaft Options
-
CL1
- No Charge - Included
-
Dyno 265
- Large Track
-
230
0207U Small Track
-
NR Cam Package
-
Adds to package 3,
choice of 252 or 274 Cam, 26 lb springs, CM Pushrods, and
reinforced rockers. Increased power (esp low
end) and rev capability. Other cams available at no charge.
Select 252
0207 for small dirt tracks, 274 0207 for medium tracks and mini-bikes,
and 274-0607 for large ovals
|
 |
PACKAGE 3 ORDER FORM
Select Options
below and click button to add to shopping cart
|
|
PACKAGE 4
|
|
6.5 Race Prepped Engine approx 14 to 15 hp, 6500 RPM Max
(7500+ with cam package_ |
|
|
|
|
|
For the serious racer. Same as package 3 but 22mm RS Mikuni , Dyno
265 Cam, Stainless Steel valves,
Flat Top Piston for Higher compression (yellow & Black clones only), Stud Kit, Aluminum Flywheel, and race prepped short block. Approx
11.5 to
one compression
Motor is fully
tested and dyno'd
Available
Options
-
Fuel Pump package, includes pulse fitting, Mikuni fuel
pump, and hoses, installed.
-
Small tank for Yellow
Engines -
Tank (Genuine Honda) is smaller and uses shorter gas cap to
reduce overall height approx 1 1/4"- Esp for Doodlebugs)
-
High Compression Package,
adds 14 cc Head (adds Flat Top for Blue
Clones). Increases compression to
approx 13 to 1.
-
Stock Appearing Carb Package - Deletes
22mm Mikuni, and adds Max Bored Honda 200 Carb for classes requiring
stock appearing carbs. Includes throttle plate/linkage. Optional Extreme
Carb
-
Headers
Camshaft Options
-
Dyno 265
- Included, Large Track
-
230
0207U Small Track
-
NR Cam Package
-
Adds to package 3,
choice of 252 or 274 Cam, 26 lb springs, CM Pushrods, and
billet steel rocker arms. Increased power (esp low
end) and rev capability. Other cams available at no charge.
Select 252
0207 for small dirt tracks, 274 0207 for medium tracks and mini-bikes,
and 274-0607 for large ovals
Note: Blue Clone include 14cc head and dished piston. |
|
PACKAGE 4 Engine ORDER FORM
Select Options
below and click button to add to shopping cart
|
|
|
|
PACKAGE 5
|
|
For power levels beyond 15hp, we recommend starting with a genuine Honda
motor. See our GX200 race engine page or give us a call. |
|
Lead time on motors ranges from 1 to
3 days for a Package 1 to around 4 weeks all out race motors. We do
keep some engines on the shelf and ship as quick as we can, However, this is
dependent on time of year. Expect longer lead times before and
during race season
Stroker Package requires removal of Compression
release and must be started using hand held electric starter. Motor is
shipped with extended starter nut and aluminum fan cover (no recoil)
|
|