|
|
|
PREDATOR 212cc
ENGINES
MOTORS SOLD FOR ORGANIZED
COMPETITION PURPOSES OR EXPORT ONLY
(NOT FOR USE ON ANY
EQUIPMENT, OFF ROAD, RECREATIONAL, OR EMISSIONS CONTROLLED
APPLICATIONS. DOING SO IS A
VIOLATION OF FEDERAL LAW) |
|
Stock Engines
Package
1 Engines
Package
2 Engines
Package
3 Engines
Package
4 Engines |
|
WARNING: STOCK FLYWHEELS ARE UNSAFE!!!!
ANY MOTOR WITH GOVERNOR REMOVED SHOULD USE AN ALUMINUM FLYWHEEL. |
|
ENGINES - NEW IN BOX
($10 additional shipping added to all clones) |
|
212 cc Predator
Gas-saving overhead valves for cooler, cleaner performance and longer
life. Horizontal shaft makes this an ideal all-purpose replacement engine.
- 8.8 ft. lbs. @ 2500 RPM
- Precision machined aluminum alloy crankcase with heavy duty cast
iron cylinder
- Ball bearing support shaft for long life
- Fuel shut off for safe transport
- Recoil start
- EPA certified
|
 |
212 cc Predator 8.8 ft. lbs. @ 2500 RPM |
$139.00 (+$10 additional shipping for all
clones) |
|
|
PACKAGE 1
IN STOCK AND READY TO SHIP
|
|
Predator Race Prepped Engine , 5500 RPM Max |
|
|
|
|
212cc Predator Race prepped including, Open
Element Air Filter adapter (no filter), removal of governor, 18 lb Valve Springs,
Small fan, Advanced Timing, and Rejetted carb. 8.5+ HP. Just add Oil, your
exhaust and linkage and go racing.
Aluminum or Honda flywheel recommended. Stock flywheels are prone to
failure.
A vailable as a "Ready to go" Motor - Same as above but includes
Cone style Air
Filter, Linkage, Header/exhaust pipe, throttle cable, and fuel pump mounting plate (Note: If ordered with
Gas Tank, fuel pump mounting plate is not included)
Available
Options
-
Honda Jet Option.
The
standard package(s) use a drilled jet to keep cost down, However using
genuine Honda jets as shown up to 0.2 hp improvement over a jet.
-
CL1 Dyno Cam - Installed
-
Set up for Methanol
-
Billet Rod, Installed
-
Dyno test engine
-
Aluminum Flywheel
-
OEM Honda Flywheel Installed (When available)
-
Fuel Pump package, includes pulse fitting, Mikuni fuel
pump, and hoses, installed.
|
|
212 cc PREDATOR
PACKAGE 1 ORDER FORM
Select Options
below and click button to add to shopping cart
|
|
PACKAGE 2 Free
Shipping
IN STOCK AND READY TO SHIP
|
|
|
|
|
|
|
Same as Package 1, but adds a bored carb, 1.2 Rocker Arms, and a
race prepped & milled head. Approx 9.3 to 1 compression.
Aluminum flywheel recommended. Stock
flywheels are prone to failure
A vailable as a "Ready to go" Motor - Same as above but includes
Cone style Air
Filter, Linkage, Header/exhaust pipe, throttle cable, and fuel pump mounting plate (Note: If ordered with
Gas Tank, fuel pump mounting plate is not included)
Available
Options
-
Honda Jet Option. The standard package(s)
use a drilled jet to keep cost down, However using genuine Honda jets as
shown up to 0.2 hp improvement over a jet.
-
Genuine Honda Carb (Kehein) Option. Adds
a genuine Honda carb for smoother running, more power, and easier
starting.
-
CL1
Dyno - Installed
-
Set up for Methanol
-
Billet Rod, Installed
-
Dyno test engine
(must order Honda or Aluminum flywwheel)
-
Aluminum Flywheel
-
OEM Honda Flywheel Installed (When available)
-
Fuel Pump package, includes pulse fitting, Mikuni fuel
pump, and hoses, installed.
Note: Billet rod required for SA Extreme or 252 Cam package. |
|
PACKAGE 2 ORDER FORM
Select Options
below and click button to add to shopping cart
|
|
PACKAGE 3
|
|
212 PREDATOR, 6500 RPM Max |
|
Same as
package 2 but with more power and higher Rev capability. Adds full ported
head, bored carb, 18 lb Rev kit, Billet Rod, 1.3 Rockers, Honda Cast Iron
Flywheel, HD Bolt
kit and Dyno MOD 2 . Has Fuel Pump Pulse Fitting installed.
Approx 10.7 to one compression.
Aluminum flywheel recommended.
Motor is fully
tested and dyno'd
A vailable as a "Ready to go" Motor - Same as above but includes
Cone style Air
Filter, Linkage, Header/exhaust pipe, throttle cable, and fuel pump mounting plate (Note: If ordered with
Gas Tank, fuel pump mounting plate is not included)
Available
Options
-
Honda Jet Option. The standard package(s)
use a drilled jet to keep cost down, However using genuine Honda jets as
shown up to 0.2 hp improvement over a jet.
-
Genuine Honda Carb (Kehein) Option. Adds
a genuine Honda carb for smoother running, more power, and easier
starting.
-
Set up for Methanol
-
Aluminum Flywheel
-
Fuel Pump package, includes pulse fitting, Mikuni fuel
pump, and hoses, installed.
Camshaft Options
-
CL1
- No Charge - Included
-
230
0207U Small Track
-
NR Cam Package
-
Adds to package 3,
choice of 252 or 274 Cam, 26 lb springs, CM Pushrods, and
reinforced rockers. Increased power (esp low
end) and rev capability. Other cams available at no charge.
Select 252
0207 for small dirt tracks, 274 0207 for medium tracks and mini-bikes,
and 274-0607 for large ovals
|
|
PACKAGE 3 ORDER FORM
Select Options
below and click button to add to shopping cart
|
|
PACKAGE 4
|
|
212 PREDATOR 6500 RPM Max |
|
|
|
|
|
For the serious racer. Same as package 3 but
adds 22mm RS Mikuni , Stainless Steel valves, Stud Kit, Aluminum Flywheel, and race prepped short block. Approx 10.7 to
one compression
Motor is fully
tested and dyno'd
Available
Options
-
Fuel Pump package, includes pulse fitting, Mikuni fuel
pump, and hoses, installed.
-
High Compression Package,
adds choice of 14 cc Head
and/or flat flat piston. Increases compression to either 11.8 or 12.8
cc (11.8 is shipped unless specified)
-
Stock Appearing Carb Package - Deletes
22mm Mikuni, and adds Max Bored Honda 200 Carb for classes requiring
stock appearing carbs. Includes throttle plate/linkage.
-
Headers
Camshaft Options
-
NR Cam Package
-
Adds to package 3,
choice of 252 or 274 Cam, 26 lb springs, CM Pushrods, and
billet steel rocker arms. Increased power (esp low
end) and rev capability. Other cams available at no charge.
Select 252
0207 for small dirt tracks, 274 0207 for medium tracks and mini-bikes,
and 274-0607 for large ovals
|
|
PACKAGE 4 Engine ORDER FORM
Select Options
below and click button to add to shopping cart
|
|
|
|
PACKAGE 5
|
|
For power levels beyond 15hp, we recommend starting with a genuine Honda
motor. See our GX200 race engine page or give us a call. |
|
Lead time on motors ranges from 1 to
3 days for a Package 1 to around 4 weeks all out race motors. We do
keep some engines on the shelf and ship as quick as we can, However, this is
dependent on time of year. Expect longer lead times before and
during race season |
|