|
ENGINE
TOOLS |
|
CARB
TOOLS CAM
TOOLS
DIAL
INDICATORS
DRILL
BITS AND REAMERS
COMPRESSION TESTERS
LEAK DOWN TESTERS
FLYWHEEL TOOLS
HONES
GAUGES,
MICROMETERS, ETC
PORTING TOOLS
PISTON
AND RING TOOLS
SPRING TOOLS
TIMING LIGHTS
THREAD REPAIR
TORQUE PLATES
TORQUE
WRENCHES
VALVE
SEAT CUTTERS
VALVE LAPPERS
VALVE GUIDE TOOLS
|
|
CARB TOOLS |
|
Float Level Gauge 120/160/200 (OEM Honda) |
 |
07401-0010000 |
$49.00 |
|
|
Carburetor Venturi, Go - No Go gage, QMA 120 |
 |
KLVEN120 |
$39.00 |
|
|
Carburetor Venturi, Go - No Go gage, QMA 160 |
KLVEN160 |
$39.00 |
|
|
Carburetor Venturi, Go - No Go gage, ASN 200 |
KLVEN200 |
$39.00 |
|
|
Carburetor Venturi, Go - No Go gage, AKRA 6.5 HP (.615 NoGo) |
KLVEN615 |
$39.00 |
|
|
Pop Off Gauge |
 |
SM-G4464 |
$59.00 |
|
|
CAM TOOLS |
|
Cam Checking Fixture and Indicator, Order degree wheel and piston stop
separate, GX120/200 and 6.5 Clones |
 |
NRCAMFIXT |
$49.00 |
|
|
NEW Cam & Rocker Arm Checking Fixture.
Designed to check lift at the rocker arms but can also check lift at the
cam. No need to remove head. Includes dial indicator and extension
GX120/200 and 6.5 Clones |
 |
|
$75.00 |
|
|
Crankshaft Cam & Governor Gear Driver
Kit GX120 (OEM Honda) |
|
07746-0030100/200 |
$75.00 |
|
|
Crankshaft Cam & Governor Gear Driver
Kit GX160/200 (OEM Honda) |
|
07746-0030100/300 |
$76.00 |
|
|
Degree Wheel, 11" |
 |
DW11 |
$40.00 |
|
|
Dial indicator, 1" |
 |
KLDIAL1 |
$29.00 |
|
|
Dial indicator, 2" |
KLDIAL2 |
$39.00 |
|
|
Piston stop for checking TDC
GX120/200 and 6.5 Clones |
 |
NRSTOP |
$30.00 |
|
|
ENGINE TOOLS |
|
Compression Tester, Good Quality |
 |
LON73025 |
$50.00 |
|
|
Leakdown Tester, Dual Gauge (may vary from picture) |
 |
LON73010 |
$99.00 |
|
|
Timing Light, Self Powered for Hondas, MSD |
 |
MSDTIM |
$209.00 |
|
|
Timing Light, Self Powered for Hondas |
 |
TIM |
$75.00 |
|
|
Torque Plate, Bore, Bolts included |
 |
GX120 to 200
6.5 Clones |
$25.00 |
|
|
GX240 to GX390 and 11/13 hp Clones |
$35.00 |
|
|
DRILL BITS AND REAMERS |
|
Drill Bit, Head Dowl Pin, Used to lengthen dowl pin hole when milling heads. |
 |
8851A51 |
$9.00 |
|
|
Drill Bits for Jets, Use to drill your own jets. |
|
$2.00 |
|
|
REAMER, Carb, 15.5 mm (.610) |
 |
8851A51 |
$49.00 |
|
|
REAMER, Carb, .615 |
2777A638 |
$59.00 |
|
|
REAMER, Carb, 16mm (.630) |
|
$49.00 |
|
|
REAMER, Carb, 16.5mm (.650) |
|
$49.00 |
|
|
REAMER, Carb, 17mm (.670) |
|
$49.00 |
|
|
FLYWHEEL TOOLS |
|
Flywheel Knocker |
 |
GX200
6.5 Clones |
$30.00 |
|
|
GX240 to GX390
13 hp Clones |
$35.00 |
|
|
HONES
(all 160/200 hones will fit 6.5 Clones and
Predators) |
Small Cylinder Hone
For 1 3/4 to 2 3/4 inch cylinders.
- Precision built for small cylinders.
- Stones are 3 1/2 inch long, assuring unusual accuracy.
- Stones cover full range, are easily changed and available in four
grits.
- Comes complete with medium grit stone sets in sturdy storage case.
(Note: Replacement stones are for 2.35" to 2.75") |
 |
LISHONE |
$199.00 |
|
|
Replacement Stones Coarse 80 grit
2.35 to 2.75" Range |
$24.00 |
|
|
Replacement Stones Med 180 grit
2.35 to 2.75" Range
|
$24.00 |
|
|
Replacement Stones Fine 280 grit
2.35 to 2.75" Range
|
$24.00 |
|
Hone, Cylinder, Truing, Adjustable, Ammco, 1.875 to 2.75. USA Made.
Very High Quality
- Range: 1 7/8 inches to 2 3/4 inches
- Cleans and trues to factory specs
- Adjustable depth stop
- Use with 1/2 inch drill.
- Metal storage box set includes: Part # 3951 & 3952 stone sets, part
# 1880 drive shank, part # 8854 depth stop.
- Oversize stone carriers increase range from 2 3/4 inches to 3 5/8
inches
|
|
AMMCO HONE
TD3950 |
$349.00 |
|
|
Replacement Stones 60 grit 3951 |
$49.00 |
|
|
Replacement Stones 220 grit 3952 |
$49.00 |
|
|
Hone, Cylinder, GX120, Ultra Fine Finish |
 |
GDUF250 |
$60.00 |
|
|
Hone, Cylinder, GX160/200, Ultra Fine Finish |
GDUF300 |
$75.00 |
|
|
Hone, Cylinder, 180 Grit, GX120 |
 |
4424A33 2500 |
$40.00 |
|
|
Hone, Cylinder, 180 Grit, GX160/200 |
4424A45 2750 |
$45.00 |
|
|
Hone, Cylinder, 240 Grit, GX120 |
4424A215 2500 |
$45.00 |
|
|
Hone, Cylinder, 240 Grit, GX160/200 |
4424A218 2750 |
$49.00 |
|
|
Hone, Cylinder, 320 Grit, GX120 |
4424A214 2500 |
$54.00 |
|
|
Hone, Cylinder, 320 Grit, GX160/200 |
4424A217 2750 |
$59.00 |
|
|
Hone, Piston Pin & Small Rod End, GX120 |
 |
240 Grit (14) |
$25.00 |
|
|
600 Grit (14) |
$35.00 |
|
|
Hone, Piston Pin & Small Rod End, GX160/200 |
|
240 Grit (18) |
$25.00 |
|
|
600 Grit (18) |
$35.00 |
|
|
Hone, Rod End 120 |
|
240 Grit (1150) |
$28.00 |
|
|
600 Grit (1150) |
$43.00 |
|
|
Hone, Rod End, Big 160/200 |
|
240 Grit (1250) |
$30.00 |
|
|
600 Grit (1250) |
$45.00 |
|
|
Hone, Lifter Bores, 240 Grit |
 |
4424A133 (9.5) |
$24.00 |
|
|
Hone, Valve Guide, 240 Grit |
|
GDVGF64M |
$24.00 |
|
|
GAUGES, MICROMETERS, ETC |
|
CC Gauge - Used for CC chamber on ASN, WKA, BSP engines. Fits in spark plug
hole |
 |
CC |
$25.00 |
|
|
Electronic Calipers |
 |
CAL |
$20.00 |
|
|
Micrometer Set, 0 to 3", Digital |
 |
NRMIC |
$99.00 |
|
|
Pin Gage set .011” to .060” |
 |
KLPIN |
$39.00 |
|
|
Plasti gauge |
 |
PLAST |
$5.00 |
|
|
Bore gauge, 0.7" to 1.5" (use for Rod Ends) |
 |
GDBORESM |
$79.00 |
|
|
Bore gauge, 2" to 6" |
SUMBORELG |
$79.00 |
|
|
PORTING TOOLS |
|
Porting Kit, Carbide Cutters.
Kit contains 2 6" Round Cutters for port shaping
(one round and one tapered) and one 2" cutter for the short side
radius.
Use
for rough head porting |
 |
PCARCUTTERS |
$60.00 |
|
|
Porting and Polishing Kit, Sanding Rolls Use
for head porting and polishing. Also use for finishing after using carbide
cutters. |
 |
PORTPOL |
$49.00 |
|
|
Porting and Polishing Kit, Cross Buff. Use
to remove hone marks and cross hatching from rods and pistons. Kit
contains 2 fine small and 2 fine large wheels, and mandrel |
 |
CROSSPOL |
$27.00 |
|
|
PISTON AND RING TOOLS |
|
Ring Compressor, Adjustable" |
 |
For GX120 to 200 (2.75" max bore) |
$20.00 |
|
|
For 200 Big Bore Motors |
$15.00 |
|
|
NEW Ring Compressor, Aluminum
For GX160 and 200 std bore.
This is the best and easiest
compressor to use. One you use this, you will never use a band or adjustable
compressor again. |
 |
|
$30.00 |
|
|
Ring Gap File |
 |
NRGAPFILE |
$69.00 |
|
|
Ring Lapper (GX120) |
 |
NRRNG120 |
$30.00 |
|
|
Ring Lapper (GX160, GX200) |
NRRNG160 |
$30.00 |
|
|
PUSHROD TOOLS |
|
Adjustable Push Rod tool for checking for proper pushrod length. Adjust from
approx 1.2". Price is for one pushrod Must be used with 12 lb springs. DO NOT RUN IN MOTOR |
 |
GX160 to 200s |
$30.00 |
|
|
GX240 & 270s |
$30.00 |
|
|
GX340 & 390s |
$30.00 |
|
|
SOCKETS |
|
Socket for ARC Clone and GX200 Rods 12 pt 1/4", 1/4" Drive |
 |
1/4 12pt |
$10.00 |
|
|
SPRING TOOLS |
|
Spring Seat Cutter Used for
Cutting Spring seats for dual springs and/or increasing spring installed
height.
GX200 and 6.5
Clone |
 |
SPRING SEAT CUTTER |
$89.00 |
|
|
Spring Tester This one of a kind
tool is essential in establishing what pressure your valve spring will exert
when it is installed at the height your installed height gauge says it is.
|
 |
CCSPRGTEST |
$106..00 |
|
|
Valve Spring Compressor - Hand Held compressor used to install heavy valve
springs on Honda heads. GX200 and 6.5 Clones. |
  |
VSPGCOMPRESS |
$24.99 |
|
|
Valve Spring Compressor -uses only a 10mm
wrench and creates a simple hands free way on compressing your valve
springs. The tool works with all types of retainers, keepers and valve
springs. |
 |
REVCOMPRESS |
$39.99 |
|
|
THREAD REPAIR TOOLS |
|
Thread Repair Kit, 6mm - Includes tools and inserts to repair valve cover,
coil, & shroud threads |
 |
M6 |
$59.00 |
|
|
Thread Repair Kit, 8mm - Includes tools and inserts to repair Head & Side
Cover threads, GX200 |
M8 |
$59.00 |
|
|
Thread Repair Kit, 10mm - Includes tools and inserts to repair Head Bolt threads,
GX390 |
M10 |
$69.00 |
|
|
TORQUE WRENCHES |
|
1/4" 20-200 Inch
Lb Torque Wrench.
Torque Specs for Hondas GX160/200s:
Head Bolts - 180 inch/lbs
Side Cover, GX160 & 200 - 180
inch/lbs
Side Cover,(GX120 - 100 inch/lbs
Rod Bolt, OEM Honda - 110 inch/lbs |
 |
Economy Model, Chinese Made |
$40.00 |
|
|
High Quality, Professional Grade, US Made |
$130.00 |
|
|
VALVE GUIDE TOOLS |
|
Valve Guide Driver |
 |
1357821 |
$16.00 |
|
|
Valve Guide Reamer, GX120 to GX200 and 6.5 Clones |
 |
5.52mm Tapered, Genuine Honda |
$79.00 |
|
|
5.5mm Straight, Aftermarket |
$30.00 |
|
|
Valve Guide Reamer, GX240 to GX390 and 13hp Clones |
6.6mm Tapered, Genuine Honda |
$79.00 |
|
|
6.5mm Straight, Aftermarket |
$35.00 |
|
|
Valve Guide GO/NO Go Gauge |
|
MC217219 |
$29.00 |
|
|
Valve Guide Service Kit - Includes
GO/NOGO Gauge, Driver, Reamer, and Hone |
 |
VGSEKIT |
$129.00 |
|
|
VALVE LAPPING TOOLS |
|
Valve Lapper for Drill GX120 |
 |
NRLAPSM |
$15.00 |
|
|
Valve Lapper for Drill GX160/200 |
NRLAPLG |
$15.00 |
|
|
Valve Lapper, Hand |
 |
NRHNDLAP |
$10.00 |
|
|
Valve Lapping Compound, 90 Grit Silicon Carbide. Use for pitted and rough
used valves. 2 oz |
 |
90GRITVLC |
$12.00 |
|
|
Valve Lapping Compound, 220 Grit Silicon Carbide. Use after cutting seats or
after using 120 grit. 2 oz |
220GRITVLC |
$12.00 |
|
|
Valve Lapping Compound Package. Contains 2 oz of 120 grit and 2 oz of 280
Grit Silicon Carbide. Use 120 grit for used valves and follow with 280 grit. |
120280GRITVLC |
$20.00 |
|
|
Valve Lapping Compound, 500 Grit Aluminum Oxide. Used if ultra fine finish
is desired. |
500GRITVLC |
$14.00 |
|
|
VALVE AND VALVE GUIDE TOOLS |
|
Valve Seat Cutter Kit, Single Angle, 46 degrees, Includes Cutter, Case,
Pilot, T-Handle, & Tool kit |
 |
GX120 to GX200
6.5 OHV |
$129.00 |
|
|
GX240 to GX390
13 hp OHV |
$169.00 |
|
|
Valve Seat Cutter Kit for , Three Angles, Includes Cutters 30/46/60, Case,
Pilot, T-Handle, & Tool kit |
GX120 to GX200
6.5 OHV |
$269.00 |
|
|
GX240 to GX390
13 hp OHV |
$339.00 |
|
|
EZ Spin Handle for above kits Turn cutters continuously. Improves control
of material removal. Includes Drive Adaptor (NTW-503-1) to convert 1/2" to
3/8". |
 |
NEWAY-EZ |
$69.00 |
|
|
|
|
346959315041798, Cost: $5.93Pictures are for reference only.
|
